CLB-25 : 25mm cover block for beam (pack of 100 pieces)

CLB-25 cover blocks for beam are designed to meet the unique requirements of beam construction. Here’s why they are the ideal choice for your projects:

Customized for Beams

CLB-25 Cover Blocks are purpose-built for beams, ensuring they precisely meet the requirements of your beam construction. They provide an optimal clear cover of 25mm from the ring, guaranteeing structural integrity and ensuring your project’s longevity.

Versatile Sizes of steel bars

Flexibility is key in construction, and that’s why CLB-25 Cover Blocks are engineered to accommodate main bars of up to 25mm and ring bars of up to 12mm. This versatility makes them suitable for a wide range of beam reinforcement needs, providing you with a solution that adapts to your project’s specific demands.

Self-Locking Mechanism

Concerned about movement during concrete pouring? CLB-25 Cover Blocks feature a self-locking mechanism at the intersection of ring and main bars. This ensures a secure and hassle-free installation, eliminating any worries about displacement during the construction process.

Pre-Installation Convenience

Time and precision are crucial in construction. Thanks to its innovative push-and-hold mechanism, CLB-25 can be effortlessly installed before placing down beams. This streamlines your construction process, saving you time and ensuring every step is executed with precision.

Method of Use in Down Beam

Before lowering the beam cage, simply push CLB-25 Cover Blocks at the intersection of the ring and main bar. Its built-in push-lock mechanism will automatically secure the top bar without the need for binding wire. It’s recommended to avoid using side bars. If there are three bars on the bottom side, install CLB-25 at the central bar. For beams with four or more bars, position CLB-25 next to the side bars on both sides of the beam. Maintain a linear spacing distance of 3 feet between two spacers for optimal support and alignment.

How to Put Down Beam

Remember, CLB-25 Cover Blocks are designed to bear the load, not the impact. To safeguard them from the impact of a dropped beam, follow these methods:

– Lower the beams slowly and steadily using a crane or jacks.
– Alternatively, place a plank or pipe in the cage to absorb the impact. Then, lower the beams and remove the plank or pipe. CLB-25 will maintain the desired gap of 25mm under the rings for a clear cover.

How to Use for Surface or Plinth Beams

For surface or plinth beams, follow these steps:

– Raise the reinforcement matrix locally using a pipe or plank as a cantilever.
– Install CLB-25 at the intersections of the ring and both side bars.
– Maintain a linear distance of 3 feet between each CLB-25 Cover Block.

Upgrade your beam construction with CLB-25 Cover Blocks and gain the confidence that comes with precise clear cover, versatility, and ease of installation. Trust in CLB-25 for beams that not only meet your construction needs but also stand the test of time.